Masonry mortar S-10

Purpose: For the setting of walls from silicate, ceramic, porous concrete and dense silicate concrete blocks, and for the jointing of seams. Can be used for both internal and external construction. Characteristics: Resistance to frost and moisture, plastic when bricklaying.

Additional information

Preparation:
Clean water should be poured into powder of mortar and mixed. It is recommended to leave prepared mixture for 15 min. before the use. After this time mixture should be mixed again. It is recommended to mix mortar with an electric beater or with a special mixer. Prepared mixture should be used in three hours.
13-16% of water/ for one unit of mortar (about 3,25-4 liters / 25 kg pack).

Usage:
Set when temperature is +5°C +25C°. Eyes and skin must be protected because of cement and lime which are in mixture. the walls after bricklaying must be protected from wind, sun and rain for 7 days.

Dėmesio!
Dry mortar reacts with water and this produce a alkali. So keep your eyes and skin and try to avoid breathing the mortar dust. If dry mortar or prepared mixture  Tuo atveju kai sausas skiedinys arba paruoštas skiedinys pateko į akis, reikia plauti dideliu vandens kiekiu ir kreiptis į gydytoją. Saugoti nuo vaikų.

Storage and Packing:
25 kg popieriniai maišeliai. Gaminį saugoti originalioje pakuotėje 6 mėnesius nuo pagamintos datos, sausoje ir vėsioje vietoje ant medinių padėklų.

Input:
1,7 kg/m² kai siūlės storis 1 mm. 

Technical specifications: